MyoLift Triwave Microcurrent Device: What to Expect
By 7E Wellness | Published: 2026-10-23
Category: How-to Guides
Learn how to use the MyoLift Triwave microcurrent device for at-home facial toning. This guide covers prep, waveforms, and common mistakes.
Quick answer
The MyoLift Triwave delivers three microcurrent waveforms for lifting, toning, and lymphatic drainage. Use it after cleansing and before serums for best results.
Why waveform choice matters
The MyoLift Triwave offers three waveforms: Rejuv for lifting and toning, Microcurrent for fine lines and wrinkles, and a third for lymphatic drainage to clarify and detox skin. Each targets a different skin concern, so selecting the right one for your session is key.
Do not use masks with the MyoLift Triwave while on the Rejuv waveform. This is a common oversight that can reduce effectiveness or cause discomfort.
Prepping your skin for the device
Start with a clean, dry face free of makeup, oil, or heavy creams. The device works best when skin is bare so the microcurrent can penetrate evenly.
Apply a thin layer of conductive gel or serum. Without proper conductivity, you may feel a sharp sensation or see no results. The ReStore Anti-Aging Conductive Gel is a compatible option.
How to use the MyoLift Triwave step by step
- Step 1: Cleanse and dry your face: Remove all makeup, wash with a gentle cleanser, and pat dry. Any residue can block the microcurrent and cause uneven results. Common mistake: Applying conductive gel over makeup or moisturizer reduces conductivity and may cause tingling.
- Step 2: Apply conductive gel or serum: Apply a thin, even layer of conductive gel to the areas you plan to treat. Avoid thick layers that can cause the device to slide unevenly. Checkpoint: If the device feels sticky or drags, you may need more gel. If it tingles sharply, you may have too little.
- Step 3: Choose your waveform: Select Rejuv for lifting and toning, Microcurrent for fine lines and wrinkles, or the lymphatic waveform for detox. Press the button to cycle through options. Common mistake: Using the Rejuv waveform with a mask on can cause discomfort or reduce effectiveness. Always check the waveform before applying a mask.
- Step 4: Glide the device upward and outward: Starting at the neck, glide the device in upward strokes toward the hairline. Use gentle pressure—do not press hard. Each area should take about 30 seconds. Checkpoint: If you feel a pulling sensation, you are moving too fast. Slow down for better results.
- Step 5: Clean the device and apply serums: After use, wipe the device heads with a damp cloth. Apply your regular serums or moisturizer immediately after, as microcurrent temporarily increases absorption. Common mistake: Leaving conductive gel on the device can dry and clog the heads. Always clean after each use.
Product facts
- MyoLift Triwave Microcurrent Device: True Microcurrent Treatment Benefits: Lifted skin for more youthful appearance, reduce the appearance of fine lines and wrinkles, lymphatic drainage to clarify and detox skin, more defined jawline and contoured cheeks. This means you can target multiple concerns—lifting, toning, and detox—with one device by switching waveforms during your routine.
MyoLift Triwave Microcurrent Device
