MyoLift MD Upgrade USB: Installation and First Use Guide

Quick Answer

To install the MyoLift MD Upgrade USB, connect the USB to your computer, run the software installer, and follow the on-screen prompts. After installation, you can create up to 9 custom protocols by selecting waveform, intensity, and duration.

Installation and First Use Steps

1. Insert the USB Drive: Plug the MyoLift MD Upgrade USB into an available port on your computer. Wait for the system to recognize the drive (a notification or new drive letter should appear). If nothing appears, try a different USB port or restart your computer.
2. Run the Installer: Open the USB drive folder and double-click the setup file (usually named 'MyoLift_MD_Upgrade.exe' or similar). Follow the on-screen prompts to complete the installation. Accept the license agreement and choose an installation location. Make sure you have administrator rights; otherwise the installer may fail.
3. Launch the Software: After installation, open the MyoLift MD Upgrade software from your desktop shortcut or Start menu. The interface will show options to create new protocols or edit existing ones. If the software doesn't open, check that your antivirus isn't blocking it and that you installed the correct version for your OS.
4. Create Your First Custom Protocol: Click 'New Protocol' and select the waveform type (e.g., microcurrent or other available options). Set the intensity level and treatment duration. Save the protocol with a descriptive name (e.g., 'Client A - Lifting'). Start with lower intensity settings when testing a new protocol on a client to avoid discomfort.
5. Transfer the Protocol to Your MyoLift MD: Connect your MyoLift MD device to the computer using the provided USB cable (if applicable) or follow the software's sync instructions. The software will upload your custom protocols to the device. Ensure the device is fully charged before syncing to prevent interruption.
6. Test the Protocol on the Device: Disconnect the device and power it on. Navigate to the custom protocol menu and select the new protocol. Apply conductive gel and test on a small area to confirm the settings feel correct. If the protocol doesn't appear, repeat the sync process and verify the device is in the correct mode.

Product Details

• Myolift MD Upgrade | Software USB: The MyoLift MD Upgrade USB software allows you to create customized protocols by choosing the waveform, intensity, and duration. This means you can design up to 9 unique treatments, tailoring each session to a client's specific skin concerns rather than relying on generic presets.